• Up to 40-amp continuous current with proper air flow, with 55-amp burst current (15 seconds)
• 5-volt switch-mode BEC circuit capable of 2.5-amp continuous current on any recommended input voltage
• Drive up to 7 analog or 6 digital standard-size servos with the BEC on any recommended input voltage
• 3–6S Li-Po, 9- to 18-cell Ni-Cd/Ni-MH input voltage
• Finned heat sinks
• Programmable motor braking
• Safe power-arm mode prevents accidental starts
• Programmable low-voltage cut-off with settings for 3S Li-Po (9V), 4-cell Li-Po (12V), 5-cell Li-Po (15V), 6-cell Li-Po (18V) or 70% of battery starting voltage
• Programmable soft start for helis and airplanes
• Auto motor shutdown if signal is lost or there is interference
• Programmable timing—5 user-selectable ranges for use with a large variety of brushless motors
• Programmable throttle input range (1.1–1.9 ms or 1.2–1.8 ms)
• Heli mode for starting the motor with a low speed ratio
• Utilizes new smaller MOSFET technology to save weight
• Radio system power on/off switch
• Pre-wired connectors—E-flite® EC3™ connector on battery input and 3.5mm female gol
• bullets on motor output leads

       Specificatie's

* Rem                                             : Ja is te programmeren

* Continue Max. Stroom                    : 40 Amp met redelijke koeling

* Input Voltage                                : 10,8 - 22,2 volt

* Input Stekker en draad                   : 13 AWG met E-flite EC3 stekker

* Output Stekker en draad                 : 13 AWG met 3.5 mm female gold plated bullet stekker

* Tijdelijke piek stroom                      : 55 Amp ( 15 Sec)

* Afmeting                                        : 68,6 x 33,0 x x12,7 mm

* Gewicht                                          : 62 Gram

* Draad dikte advies                          : 13 AWG